dk-507_im_A0XW-9553-00E.pdf
(
1175 KB
)
Pobierz
DK-507
Desk
INSTALLATION MANUAL
Applied Machines: C360/C280/C220
COLOR MFP: 36 ppm/28 ppm/22 ppm
Product Code: A0ED
Note:
Lifting the machine in an awkward position or
transporting it in a poorly balanced position could
result in personal injury. When transporting the
machine, assign an adequate number of persons
to the job and ensure that each person can take a
good position of not being excessively loaded
(mass: approx. 22.5 kg (50 lb)).
No.
Name
Shape
Q’ty
8.
Screw B
(4 × 8 mm)
9
4038IXC033DA
9.
Screw C
(4 × 10 mm)
4
4038IXC033MA
I. Accessory parts
10.
Installation
manual
1
set
No.
Name
Shape
Q’ty
1.
Fixing leg A
4980IXC019MA
3
4348U020MA
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.
2.
Fixing leg B
1
4348U020MB
Note:
This manual provides the illustrations of the acces-
sory parts and machine that may be slightly differ-
ent in shape from yours. In that case, instead of
the illustrations, use the appearance of your
machine to follow the installation procedure. This
does not cause any significant change or problem
with the procedure.
3.
Fixing leg
cover A
3
4348U099MA
4.
Fixing leg
cover B
1
Note:
When removing the desk from its shipping carton,
do not hold the reinforcement bracket (as a per-
sonal injury or a deformed frame could result).
4348U099MB
5.
Fixing
bracket A
3
Reinforcement bracket
4658U021AA
6.
Fixing
bracket B
1
A093IXC004DA
7.
Screw A
(black)
(4 × 8 mm)
5
4038IXC033DA
A0XWMXC041MA
A0XW-9553-00
E-1
II. Installation procedures
1. Turn off the machine.
2. Remove the cord clamp and unplug the power
cord from the machine (one screw).
5. Holding the transportation handles at the right
and left of the machine, place the machine onto
the desk. When placing the machine, use the
positioning pin in the rear of the desk to align the
machine correctly with the desk.
Note:
• When transporting or moving the machines,
assign adequate number of persons.
•
When attaching the machine, as the reference
fit the machine with the corner A and B of the
desk.
When holding the transportation handles,
be careful not to catch your fingers in the
machine.
A0XWMXC031MA
3. Remove protective tape from the desk.
A0XWMXC102MA
A0XWMXC027MB
4. Pull out the handles.
A
B
A0XWMXC103MA
6. Secure the desk to the machine by two fixing
bracket A’s (two screw A’s furnished with the
desk).
A0XWMXC101MA
A0XWMXC004MD
E-2
7. Slide out the second drawer from the paper feed
cabinet and the drawer from the desk.
8. Secure the desk to the machine by the fixing
bracket A (right) and the fixing bracket B (left).
Fixing bracket A :
one screw A furnished with the desk.
Fixing bracket B :
two screw A’s furnished with the desk.
Note:
The fixing bracket B can be placed upside down.
11. Install the fixing leg A’s at two locations in the
front shown in the illustration (six screw B’s fur-
nished with the desk).
Note:
When mounting the finisher at the same time, do
not install the fixing leg A or fixing leg cover A at
the left front side.
To reduce the risk of injury due to unsta-
ble equipment, set stabilizers before use.
➀
➁
➂
➀
➂
➁
A0XWMXC029MB
12. Install the fixing leg cover A’s (two pieces) at two
locations in the front shown in the illustration.
Note:
• Insert the fixing leg cover A’s in the direction
shown by the arrow until they click into position.
• Insert the protruded portions of the fixing leg
cover A’s shown by the arrows into the fixing
leg.
A0XWMXC028MB
9. Slide the drawers back into the paper feed cabi-
net and the desk.
10. Move the machine and desk to the installation
site. Then, adjust the two adjusters at the front to
let the desk sit on the floor.
A0XWMXC104MA
A0XWMXC030MB
E-3
13. Install the fixing leg A (left rear) and the fixing leg
B (right rear) shown in the illustration.
Tighten the screw C's into the hole A's to install
the fixing leg B.
Fixing leg A :
three screw B’s furnished with the paper feed
cabinet.
Fixing leg B :
four screw C’s furnished with the paper feed
cabinet
Note:
If the screw C's cannot be tightened into the hole
A's because the machine is installed on cushioned
floor such as a carpet, use the hole B's.
14. Install the fixing leg cover A (left rear) and the
fixing leg cover B (right rear) shown in the illus-
tration.
Note:
• Insert the fixing leg cover A and B in the direc-
tion shown by the arrow until they click into
position.
•
Insert the protruded portions of the fixing leg
cover A and B shown by the arrows into the fix-
ing leg.
To reduce the risk of injury due to unsta-
ble equipment, set stabilizers before use.
A0XWIXC003DA
15. Plug the power cord into the machine and put
the cord clamp that has been removed in step 2
through the power cord to install it (one screw).
➀
➁
➂
➃
➀
➁
➂
B
A
A0XWMXC031MA
A
B
A0XWIXC002MA
E-4
Plik z chomika:
ramirez_pl
Inne pliki z tego folderu:
au-101_im_A09M-9557-00E.pdf
(362 KB)
au-102_im_A0X9-9557-00E.pdf
(359 KB)
au-201_im_A09N-9557-00E.pdf
(431 KB)
bizhub_c360_c280_c220_im_A0ED-9602-11E.pdf
(1623 KB)
df-617_im_A0HU-9560-00E.pdf
(581 KB)
Inne foldery tego chomika:
firmware c280
User Guides
Zgłoś jeśli
naruszono regulamin