kh-101_A165-9550-00E.pdf

(226 KB) Pobierz
KH-101 Keyboard Holder
INSTALLATION MANUAL
Applied Machines: C652/C552/C452
COLOR MFP: 65 ppm/55 ppm/45 ppm
Product Code: A0P0/A0P1/A0P2
I. Accessory parts
II. Installation procedures
1. Turn off the machine and unplug the power cord
from the power outlet.
2. Remove the IR upper front cover from the main
body (three screws).
No.
Name
Shape
Q’ty
1.
Mounting plate
1
A165IXC001DA
2.
Cord clamp*
3
A0W4IXC019DA
3.
Velcro
fastening
(hook & loop)
(50 × 25 mm)
3 set
A0YCIXC004DC
4.
Shoulder
screw A*
*
Install the mounting plate, making it movable or
securing it to the main body depending on client
preference.
2
A165IXC002DA
5.
Shoulder
screw B*
<When making the mounting plate movable after
installation>
3. Install two shoulder screws A furnished with the
keyboard holder into the indicated locations on
the main body.
Note:
Identify the location of the screw holes through the
gap formed after removing the IR upper front
cover in step 2.
2
A165IXC003DA
6.
Installation
manual
1 set
4980IXC019DA
*
Depending on how the mounting plate is
installed, these parts may not be used.
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.
Note:
• Local Interface Kit is required to install the key-
board holder.
• Keyboard made by Cherry Electrical Products
is recommended.
A165IXC004DA
A165-9550-00
E-1
999261745.156.png 999261745.167.png 999261745.178.png 999261745.189.png 999261745.001.png 999261745.011.png 999261745.022.png 999261745.033.png 999261745.044.png 999261745.055.png 999261745.066.png 999261745.077.png 999261745.087.png 999261745.098.png 999261745.109.png 999261745.117.png 999261745.118.png 999261745.119.png 999261745.120.png 999261745.121.png 999261745.122.png 999261745.123.png 999261745.124.png 999261745.125.png 999261745.126.png 999261745.127.png 999261745.128.png 999261745.129.png 999261745.130.png 999261745.131.png 999261745.132.png 999261745.133.png 999261745.134.png 999261745.135.png 999261745.136.png 999261745.137.png 999261745.138.png 999261745.139.png 999261745.140.png 999261745.141.png 999261745.142.png 999261745.143.png 999261745.144.png 999261745.145.png 999261745.146.png 999261745.147.png 999261745.148.png 999261745.149.png 999261745.150.png 999261745.151.png 999261745.152.png 999261745.153.png 999261745.154.png 999261745.155.png 999261745.157.png 999261745.158.png 999261745.159.png 999261745.160.png 999261745.161.png 999261745.162.png 999261745.163.png 999261745.164.png 999261745.165.png 999261745.166.png 999261745.168.png 999261745.169.png 999261745.170.png 999261745.171.png 999261745.172.png 999261745.173.png 999261745.174.png 999261745.175.png 999261745.176.png 999261745.177.png 999261745.179.png 999261745.180.png 999261745.181.png 999261745.182.png 999261745.183.png 999261745.184.png 999261745.185.png 999261745.186.png 999261745.187.png 999261745.188.png 999261745.190.png 999261745.191.png 999261745.192.png 999261745.193.png 999261745.194.png 999261745.195.png 999261745.196.png 999261745.197.png 999261745.198.png 999261745.199.png
 
4. Align the holes on the mounting plate with the two
shoulder screws A installed in step 3. Press the
mounting plate up to the main body and then
slide it to the left.
4. Align the holes on the mounting plate with the two
shoulder screws B installed in step 3. Press the
mounting plate up to the main body and then
slide it to the left until it stops.
A165IXC005DA
A165IXC007DA
For the following procedure, perform step 6.
5. Tighten the two shoulder screws B completely to
secure the mounting plate.
<When securing the mounting plate to the main
body>
3. Temporarily install two shoulder screws B fur-
nished with the keyboard holder into the indicated
locations on the main body.
Note:
• Tighten the shoulder screws B halfway to keep
a space between the screws and the main
body.
• Identify the location of the screw holes through
the gap formed after removing the IR upper
front cover in step 2.
A165IXC008DA
6. Attach the IR upper front cover removed in step 2
(three screws).
7. Attach the keyboard to the mounting plate with
the velcro fastening furnished with the keyboard
holder.
A165IXC006DA
A165IXC009DA
E-2
999261745.002.png 999261745.003.png 999261745.004.png 999261745.005.png 999261745.006.png 999261745.007.png 999261745.008.png 999261745.009.png 999261745.010.png 999261745.012.png 999261745.013.png 999261745.014.png 999261745.015.png 999261745.016.png 999261745.017.png 999261745.018.png 999261745.019.png 999261745.020.png 999261745.021.png 999261745.023.png 999261745.024.png 999261745.025.png 999261745.026.png 999261745.027.png 999261745.028.png 999261745.029.png 999261745.030.png 999261745.031.png 999261745.032.png 999261745.034.png 999261745.035.png 999261745.036.png 999261745.037.png 999261745.038.png 999261745.039.png 999261745.040.png 999261745.041.png 999261745.042.png 999261745.043.png 999261745.045.png 999261745.046.png 999261745.047.png 999261745.048.png 999261745.049.png 999261745.050.png 999261745.051.png 999261745.052.png 999261745.053.png 999261745.054.png 999261745.056.png 999261745.057.png 999261745.058.png 999261745.059.png 999261745.060.png 999261745.061.png 999261745.062.png 999261745.063.png 999261745.064.png 999261745.065.png 999261745.067.png 999261745.068.png 999261745.069.png 999261745.070.png 999261745.071.png 999261745.072.png 999261745.073.png 999261745.074.png 999261745.075.png 999261745.076.png 999261745.078.png 999261745.079.png 999261745.080.png 999261745.081.png 999261745.082.png 999261745.083.png
 
8. Connect the keyboard’s USB cable to the USB
port located on the IR section.
Note:
Connect the cable to either the front or rear USB
port.
<When the working table (WT-506) is already
attached to the main body>
9. Route the USB cable as shown in the illustration
and insert the cable into the four wire saddles.
Note:
• Arrange the cable so that it does not interfere
with opening or closing of the right door.
• Be sure to remove slack from the cable.
A165IXC010DA
Wire saddle
<When the working table (WT-506) is not attached
to the main body>
9. Attach three cord clamps furnished with the key-
board holder to the indicated locations on the
main body.
A165IXC013DA
A165IXC011DA
10. Route the USB cable as shown in the illustration
and insert the cable into the three cord clamps.
Note:
• Arrange the cable so that it does not interfere
with opening or closing of the right door.
•
Be sure to remove slack from the cable.
A165IXC012DA
E-3
999261745.084.png 999261745.085.png 999261745.086.png 999261745.088.png 999261745.089.png 999261745.090.png 999261745.091.png 999261745.092.png 999261745.093.png 999261745.094.png 999261745.095.png 999261745.096.png 999261745.097.png 999261745.099.png 999261745.100.png 999261745.101.png 999261745.102.png 999261745.103.png 999261745.104.png 999261745.105.png 999261745.106.png 999261745.107.png 999261745.108.png 999261745.110.png 999261745.111.png 999261745.112.png 999261745.113.png 999261745.114.png 999261745.115.png 999261745.116.png
 

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin