Switch_doc_en_How-to-use-SNMP-to-delete-OSPF-Area-on-DGS-3600_20110617.pdf

(240 KB) Pobierz
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
How to use SNMP to delete OSPF Area
Created at 2011/05/31
Introduction
Simple Network Management Protocol (SNMP) is a widely used protocol for
monitoring the health and welfare of network equipment.
Topology
Area 0.0.0.1
(Stub)
TR1
DUT
TR2
Area 0.0.0.0
(Backbone)
Area 0.0.0.2
(Totally Stub)
There are three OSPF areas (0.0.0.0, 0.0.0.1 and 0.0.0.2) in this topology.
1
843937797.010.png 843937797.011.png 843937797.012.png 843937797.013.png 843937797.001.png 843937797.002.png 843937797.003.png 843937797.004.png 843937797.005.png
 
OID
ospfAreaStatus
Step-by-Step
I.
SNMP Command
Blue color is OSPF area ID
snmpset -v 2c -c private <DUT IP> 1.3.6.1.2.1.14.2.1.10 .0.0.0.1 i 6
II.
Result
Area 0.0.0.1 has been deleted via SNMP.
OSPF area status on device
2
843937797.006.png 843937797.007.png 843937797.008.png 843937797.009.png
 
It remains two areas in this device.
Reference
This example is made by DGS-3600 series in firmware R 2.80.B61.
SNMP Tools is Net-SNMP.
3

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin