HOUS2001_1140027-95.pdf
(
2111 KB
)
Pobierz
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
Operator's manual (EPA)
240R 245R/RX 250R
252RX 265RX
Please read these instructions carefully and make
sure you understand them before using the machine.
English
SYMBOL EXPLANATION
Symbols
• Always wear approved protective
gloves.
WARNING! Clearing saws,
brushcutters and trimmers can be
dangerous!
Careless or incorrect use can result in
serious or fatal injury to the operator
or others.
• Use anti-slip and stable boots.
Read through the Operator‘s Manual
carefully and understand the content
before using the machine.
• Only use non-metallic, flexible
cutting elements, that is trimmer
head with trimmer cord.
Always use
• A protective helmet where there is
a risk of falling objects
• Ear protection
• Approved eye protection
Other symbols/decals on the machine refer to
special certification requirements for certain
markets.
• Max. speed of output axle, rpm
Checks and/or maintenance should
be carried out with the engine
switched off, with the stop switch in
the STOP position.
• This product is in accordance with
applicable CE directives.
• Beware of thrown objects and
ricochets.
Always wear approved protective
gloves.
• The operator of the machine shall
ensure, while working, that no
persons or animals come closer
than 15 metres.
Regular cleaning required.
Ocular control.
• Machines fitted with clearing or
grass blades can be thrown
violently to the side when the
blade comes into contact with a
fixed object. The blade can cause
the amputation of arms and legs.
Always keep people and animals at
least 15 metres from the machine.
Approved eye protection must always
be used.
• Arrows which show limits for
handle mounting.
2
– English
CONTENTS
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify the
design and appearance of products without prior notice.
List of contents
SYMBOL EXPLANATION
Symbols ............................................................................... 2
CONTENTS
Before using a new machine ................................................. 3
List of contents .................................................................... 3
SAFETY INSTRUCTIONS
Personal protective equipment ............................................. 4
The machine‘s safety equipment .......................................... 4
Control, maintenance and service of the machine‘s safety
equipment ...................................................................... 7
Cutting equipment ............................................................ 10
General safety instructions ................................................. 11
General working instructions ............................................. 12
Basic clearing techniques .................................................... 13
WHAT IS WHAT?
What is what on the trimmer/brushcutter? (240R, 245R) .. 17
What is what on the trimmer/brushcutter? (245RX) .......... 18
What is what on the clearing saw? (250R) .......................... 19
What is what on the clearing saw? (252RX) ....................... 20
What is what on the clearing saw? (265RX) ....................... 21
ASSEMBLY
Assembling the handlebars (240R, 245R, 250R) ................ 22
Assembling the handlebars (245RX, 252RX) ..................... 22
Transport position, handlebars (240R, 245R/RX, 250R,
252RX) ........................................................................ 22
Assembling the handlebars (265RX) .................................. 23
Assembly of the blade and trimmer head ............................ 24
Assembling the blade guard and grass blade ....................... 24
Assembling the blade guard and clearing blade ................... 24
Assembling the spray guard and trimmer head Trimmy SII 25
Assembling other guards and cutting equipment ................ 25
Adjusting the harness and clearing saw ............................... 25
FUEL HANDLING
Fuel mixture ...................................................................... 26
Fuelling .............................................................................. 26
START AND STOP
Control before starting ....................................................... 27
Start and stop ..................................................................... 27
MAINTENANCE
Carburetor ......................................................................... 29
Muffler .............................................................................. 31
Cooling system .................................................................. 31
Air filter ............................................................................. 32
Angle gear .......................................................................... 33
Spark plug .......................................................................... 33
Sharpening the grass blade ................................................. 33
Sharpening the clearing blade ............................................ 34
Maintenance schedule ........................................................ 34
TECHNICAL DATA
240R, 245R, 245RX .......................................................... 35
250R, 252RX, 265RX ....................................................... 36
FEDERAL AND CALIFORNIA EMISSION CONTROL
WARRANTY STATEMENT
Your warranty rights and obligations .................................. 38
Maintenance, replacement, or repair of the emission control
devices and systems may be performed by any nonroad
engine repair establishment or individual.
!
WARNING!
Under no circumstances may the design
of the machine be modified without the
permission of the manufacturer. Always
use genuine accessories. Non-authorised
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
Your warranty does not cover damage or
liability caused by the use of non-
authorized accessories or replacement
parts.
HUSQVARNA AB HUSKVARNA SWEDEN
IMPORTANT ENGINE INFORMATION
TWC
THIS ENGINE CONFORMS TO U.S. PH1
EP
A
FOR SMALL NON - ROAD ENGINES.
REFER TO OPERATOR`S MANUAL FOR
MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
This decal certifies that the product has been approved in
accordance with American exhaust emissions requirements
EPA 1 and CARB 95.
English –
3
SAFETY INSTRUCTIONS
Personal protective equipment
The machine‘s safety equipment
IMPORTANT INFORMATION
This section describes the machine‘s safety equipment, its
function and how checks and maintenance are carried out to
ensure that it operates correctly. (See the chapter
“What is
what“
to locate where this equipment is positioned on your
machine.)
•
Incorrect or careless use of a clearing saw,
brushcutter or trimmer can turn it into a dangerous
tool that can cause serious or even fatal injury to
the operator or others. It is extremely important
that you read and understand the content of this
manual.
!
WARNING!
Never use a machine with defective safety
equipment. Follow the control,
maintenance and service instructions
described in this section.
•
When using a clearing saw, brushcutter or trimmer,
protective equipment approved by the appropriate
authorities must be used. Personal protective
equipment does not eliminate the risk of
accidents, however, it can reduce the effects of an
injury in the event of an accident. Ask your dealer
for help when choosing protective equipment.
1. Throttle trigger
lock
A
!
WARNING!
The throttle trigger lock is
designed to prevent the
throttle from accidentally
being engaged. When the
trigger lock (A) is pressed
into the handle (= when you
hold the handle) the throttle
(B) is released. When the
grip on the handle is
released the throttle and the
throttle trigger lock return
to their original positions.
This takes place via two
independent return spring
systems. This means that the
throttle is automatically
locked in its “idling“
position.
Remove your hearing protection as soon as
you stop the engine, so that you can hear
any noises or warning signals.
B
HELMET
A helmet should be worn if
trees to be cleared are higher
than 2 metres.
EAR PROTECTION
Ear protection offering
sufficient dampening effect
should be used.
EYE PROTECTION
Blows from branches or
objects thrown by the
rotating cutting equipment
can damage the eyes.
GLOVES
Gloves should be worn when
necessary, e.g., when
assembling cutting
equipment.
BOOTS
Use anti-slip and stable
boots.
CLOTHING
Wear clothes made of a
strong fabric and avoid loose
clothing that can catch on
shrubs and branches. Always
wear heavy-duty long pants.
Do not wear jewellery,
shorts, sandals or go
barefoot. Secure hair so it is
above shoulder level.
FIRST AID KIT
A first aid kit should be
carried by operators of
clearing saws, brushcutters or
trimmers.
A
B
4
– English
SAFETY INSTRUCTIONS
2. Stop switch
4. Anti-vibration
system
The stop switch should be
used to stop the engine.
Your machine is equipped
with an anti-vibration system
that has been designed to
give as vibration-free and
comfortable usage as
possible.
The use of incorrectly
wound cord or blunt,
incorrect cutting equipment
(incorrect type or incorrectly
sharpened, see section
“Filing
the blade”
) increases the level
of vibration.
The machine’s vibration
damping system reduces the
transfer of vibrations
between the engine unit/
cutting equipment and the
machine’s handle unit.
!
WARNING!
Over exposure to vibrations can result in
blood-vessel or nerve injury to persons
suffering with blood circulation problems.
Seek medical attention if you experience
physical symptoms that can be related to
over exposure to vibrations. Examples of
such symptoms are “numbness“, lack of
feeling, “tickling“, “pricking“, “pain“, lack of
or a reduction in normal strength, changes
in the colour of the skin or its surfaces.
These symptoms normally appear in the
fingers, hands or wrists.
3. Cutting
attachment guard
This guard is intended to
prevent objects from being
thrown towards the operator
and to protect the operator
from unintentionel contact
with the cutting attachment.
5. Quick-release
There is an easily accessible,
quick-release catch fitted to
the chest as a safety
precaution in the event of a
fire in the engine or for any
other situation that requires
you to free yourself from the
machine and harness. See the
section
“Adjusting the harness
and clearing saw“.
!
WARNING!
Do not attach any blade to the unit without
proper installation of all required parts.
Failure to use the proper parts can cause
the blade to fly off and seriously injure the
operator and/or bystanders.
Under no circumstances may the cutting
equipment be used without an approved
guard fitted. See the chapter “Technical
data”. If the wrong guard or a defective
guard is fitted this can cause serious
personal injury.
English –
5
Plik z chomika:
luki2-82
Inne pliki z tego folderu:
HOUS2006_1150256-95.pdf
(2534 KB)
Workshop Manual usqwm244_hwen2001_1019075-26.pdf
(2498 KB)
HOUS2007_1150810-95.pdf
(2465 KB)
husqom153hoen2004_1140252-26bcuten.pdf
(3215 KB)
HOUS2004_1140252-95.pdf
(3138 KB)
Inne foldery tego chomika:
kosiarki
piły
Zgłoś jeśli
naruszono regulamin